Linksys BEFDSR41W User Manual page 20

RFC 1483 Routed
Choose this option if your ISP told you to use this mode of encapsulation.
Use the IP address and DNS Server Address(es) provided by your ISP.
1. Enter the IP address provided by the ISP in the Specify an IP
Address field.
2. Enter the DNS Server Address(es) in the DNS 1 and DNS 2 fields.
To apply any of the settings you change on a page, click the Apply button, and
then click the Continue button. To cancel any values you've entered on any
page, click the Cancel button. For more information on this tab, you can click
the Help button.
30
Instant Broadband
Figure 6-7
Series ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Ready
™
RFC 2364 PPPoA
Choose this option if your ISP told you to use this mode of encapsulation.
Use the User Name and Password provided by your ISP.
1. Enter the User Name in the Specify an IP Address field.
2. Enter the Password in the Password field.
3. Choose either Connect on Demand or Keep Alive to determine how
the Gateway will maintain your Internet connection during any period
of inactivity. If you have been disconnected due to inactivity, Connect
on Demand enables the Gateway to automatically re-establish your
connection as soon as you attempt to access the Internet again. You can
configure the Gateway to cut your connection with your ISP after a
specific period of time (Max Idle Time). The Keep Alive option keeps
your Internet Access connected indefinitely, even when it sits idle.
To apply any of the settings you change on a page, click the Apply button, and
then click the Continue button. To cancel any values you've entered on any
page, click the Cancel button. For more information on this tab, you can click
the Help button.
Figure 6-8
31