Back Panel Connectors - Gigabyte GA-F2A88XN-WIFI User Manual

1-7

Back Panel Connectors

USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive and etc.
PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
HDMI Port
audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported
resolution is 4096x2160 (Note)
used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system. The screenshot below is from
Windows 8.)
Antenna Connector
Use this connector to connect an antenna.
(Note) The resolution of 4096x2160 can be supported when using an FM2+ APU; the maximum resolution
supported is 1920x1200 when using an FM2 APU.
Hardware Installation
The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD
Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM
, but the actual resolutions supported are dependent on the monitor being
In Windows 8, select All apps>Control Panel>Hardware and
Sound>Sound>Playback, set AMD High Definition Audio
Device to the default playback device.
Tighten the antenna cables to the antenna connectors and then move
the antenna to a place where the signal is good.
- 20 -