Switching The Osd Menu; Switching Between Different Edid Content - NEC MD302C6 Installation & Maintenance Manual

Switching the OSD menu

Different menu contents can be shown for the menu screen by switching between "Reference Menu" and "Full Menu".
Full Menu allows setting changes.
Select "MENU SELECTION" for switching menu contents.
1. Displaying the OSD main menu
Press and hold the MENU button for 2 seconds. The OSD main menu appears.
Press either + or - button to move the cursor " " and select "MENU SELECTION".
Reference Menu Full Menu
2. Switching the OSD menu
Press the MENU button. The MENU SELECTION window appears.
Press either + or - button to move the cursor " " and select the preferred OSD main menu.
Press the MENU button again to store the OSD selected main menu.
MENU SELECTION
Reference menu
Full menu
NOTE: The OSD menu disappears in 15 seconds.

Switching between different EDID content

EDID stands for Extended Display Identifi cation Data, which, among other information, reports the display's resolution
capabilities to the computer's operating system. With the "Switching EDID" function of the Full Menu OSD, two different display
modes are selectable:
"Full pixel mode", using the complete area of the LCD panel" (1x 3280 x 2048 + 2x 1640 x 2048 resolutions) and "QXGA based
mode" for backward compatibility with original 3MP displays (1x 3280 x 2048 + 2x 1536 x 2048 resolutions).
1. Displaying the OSD main menu
Press and hold the MENU button for 2 seconds. The OSD main menu appears.
Press either + or - button to move the cursor " " and select "SWITCHING EDID".
Full Menu
English-21