Table of Contents
Advertisement
Display information
Press the appropriate button located on the front bezel of the display to see display information or change settings.
1. Displaying the OSD menu
Press and hold the MENU button for 2 seconds. The following OSD menu appears.
OSD menu
See the following pages for all display information items.
DICOM conformance test (see page 19)
DICOM conformance test (see page 19)
Switching EDID (see page 21)
Switching confi guration (see page 23)
Input source auto scanning (see page 24)
Direct OSD setting menu (see page 25)
NOTE:
The OSD menu contents may be selected between "Reference menu" and "Full menu". The "Reference menu" is the
factory default.
2. Closing the OSD menu
Press either + or - button to move the cursor " " and select "Exit".
Press the MENU button to close the OSD menu.
NOTE:
The OSD menu disappears in 15 seconds without closing.
M E N U
I N F O R M A T I O N
P R E S E N T
S T A T E
D I C O M
C O N F O R M A N C E
T E S T
M E N U
S E L E C T I O N
E X I T
Information (see page 18)
Present state (see page 18)
Menu selection (see page 21)
Exit
Information (see page 18)
Present state (see page 18)
Menu selection (see page 21)
Exit
English-16
Reference Menu
Full Menu
Advertisement
Table of Contents
