Troubleshooting - Electrolux Ergorapido 87595A Manual

How do I use
Brushroll Clean
Technology™?
What if I notice loss
in performance?
How often should I wash my
filter and dust cup?
What if I notice my battery
losing performance?
Can I replace my battery at
the end of its life?
What surfaces can I clean with
my Ergorapido?

Troubleshooting

The brushroll stops spinning
1. Turn off power.
2. Remove any obstructing objects from the brushroll.
3. Allow 5 minutes for motor to cool before powering on.
The
1. Ensure your Ergorapido is fully charged.
2. Ensure you are pressing firmly on the pedal while the unit is on.
3. Check if there are large carpet fibers, heavy threads, or wires in
the brushroll - this feature will not be able to effectively
remove these obstructions.
For service information in the United States
or Canada, please telephone toll free:
1-800-896-9756
You may also visit us online at
www.electroluxappliances.com (USA)
or
www.electrolux.ca (Canada)
If the brushroll becomes clogged, press your foot down on the button while
your vaccum is running. Hold the button down for 5-10 seconds while the
brushroll cleans itself. Note: This may drain your battery, perform when fully
charged.
Keeping the dust cup and filter clean is the best way to ensure peak
performance. Empty the dust cup and clean the fine filter with the pull/
release spring.
Approximately every 2 weeks or after heavy use. Rinse the dust cup and filters
with warm water, dry completely before using. If your filters become damaged,
please call 1-800-896-9756 to order a replacement filter. Filter Style:E2
Make sure your battery has a full charge (16 hours). It is normal to lose power as
you approach the end of your run time.
Yes, please call customer service at 1-800-896-9756 to order a replacement
battery. Part Number: 988063040
You can safely clean hard wood floors, laminate, tile and low pile rugs. The
removable handvac is great for above floor cleaning.
feature isn't working
FAQs
Gestion des pannes
La brosse rotative cesse de tourner
1. Coupez l'alimentation.
2. Retirez toute obstruction de la brosse rotative.
3. Laissez le moteur refroidir pendant 5 minutes avant de le remettre en marche.
La fonction autonettoyage de la brosse ne
fonctionne pas
1. S'assurer que votre Ergorapido est pleinement chargé.
2. S'assurer de bien appuyer fermement sur la pédale alors que l'appareil est en
marche.
3. Véri ier s'il y a des grosses ibres de moquette, des ils épais ou autres sur le rouleau.
La brosse autonettoyante ne peut pas supprimer ces obstructions.
Centre de service après-vente agréé de
garantie Electrolux le plus proche de chez
vous ou des renseignements sur le service
après-vente, composez sans frais le:
1-800-896-9756
Vous pouvez aussi nous consulter sur
www.electroluxappliances.com (USA)
ou
www.electrolux.ca (Canada)
9