Toshiba T6400 Maintenance Manual page 105

4. DUMP option
(1) When DUMP is selected, the following message appears.
DIAGNOSTICS - HARD DISK & FLOPPY DISK DUMP
Format type select (0:2DD-2DD,1:2D-2D,2:2D -2HD,3:2HD-2HD)?
(2) Select a format type number. Type the number. If 3 is selected, the display will go
to the message in step (5) below.
0:
1:
2:
3:
(3) If 0, 1, or 2 is selected, the following message will appear.
Select FDD number (1:A/2:B) ?
(4) Select an FDD drive number and the following message will appear.
Insert source disk into drive x:
Press any key when ready.
(5) Remove the Diagnostic Disk from the FDD and insert a source disk. Press any key
and the following message will appear.
-- Max. address --
Type the track number and press Enter. The following message will appear.
(6)
Head number ?
Type the head number and press Enter. The following message will appear.
(7)
Sector number ??
Type the sector number and press Enter. The specified dump list will be displayed.
(8)
(9) After a dump list appears on the screen, the following message will appear.
Press number key (1:up,2:down,3:end) ?
Displays the next sector dump.
1:
Displays a dump list for a floppy disk (2DD).
Displays a dump list for a floppy disk (2D).
Displays a dump list for a floppy disk (2HD).
Displays a dump list for a hard disk.
[Track ] = xxxx
[ Head ] = xx
[Sector] = xx
Track number ??
:Vx.xx
3-51