Ford 2016 Fusion Owner's Manual page 287

E175987
4. Rotate the sealant canister up 90
degrees and pull away from
casing/housing to remove.
Installation of the sealant canister to
the kit
1. With the canister held perpendicular
to the housing, insert the canister
nozzle into the connector and push
until seated.
2. Rotate the canister 90 degrees down
into the housing/casing.
E175988
3. Snap the back cover back into place.
Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing
Wheels and Tires
E175989
4. Wrap the dual purpose hose (black
E175990
5. Wrap the power cord around the
Note: If you experience any difficulties with
the removal or installation of the sealant
canister, consult your authorized Ford dealer
for assistance.
Be sure to check the sealant compound's
use-by date regularly. The use-by date is
on a label located on the sealant canister
and can be seen through the rectangular
viewing window on the bottom of the kit.
The sealant canister should be replaced
after four years of non-use.
284
tube) around the channel on the
bottom of the housing/casing.
housing and stow the accessory power
plug into its storage area.