Sanyo VPC-HD700 Service Manual page 19

2. Lens Adjustment
Camera
Preparation:
POWER switch: ON
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
Adjustment method:
1. Set the camera 0 cm from the collimator. (Do not enter any
light.)
2. Set the camera so that it becomes center of the screen in
the collimator.
3. Double-click on the DscCalDi.exe.
4. Click the Focus, and click the Yes.
5. Lens adjustment value will appear on the screen.
6. Click the OK.
DscCalDi
Focus Result
!
STD_AFPOS=1935
FOCUS=6,1,3,99
ADJ_PZPOS=13
LENS_ERR=0
Adjustment value determination is effectuated using the "STD
AFPOS", "FOCUS" and "LENS_ERR" values.
If FOCUS=focus1, focus2, focus3, focus4 and the adjustment
values fulfill the conditions below, they are determined as within
specifications.
Adjustment value determination
1800<=STD_AFPOS<2000
-100<=focus1<=+100, -100<focus2<+100,
-100<=focus3<=+100, -200<=focus4<=+200
lens_error=0
Collimator
x
OK
3. AWB Adjustment
Camera
Preparation:
POWER switch: ON
Adjusting method:
1. When setting the camera in place, set it to an angle so that
nothing appears in any part of the color viewer except the
white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Dsc Calibration
AWB Results:
1:
AGC=223,393,562,730,899,
741,910
4F_AGC=0,0,0
WB=305,512,712
CHECK=128,127,118
WB_ND=-1,-1,-1
CHECK_ND=128,127,132
IRIS_GAIN: 42
IRIS_OFFSET: 152
IRIS=179,159,133,114,104
MS=2362,1115
MS_M=1763,1576
Fno_FOR_ISO=80
SS_FOR_ISO=13053
YLEVEL_FOR_ISO=9668
Adjustment value determination is effectuated using the "AGC",
"CHECK", "CHECK_ND", "IRIS_GAIN", "IRIS_OFFSET", "MS",
"MS_M" and "IRIS" values.
If AGC= a1, a2, a3, a4, a5, CHECK= wc0, wc1, wc2,
C H E C K _ N D = w n c 0 , w n c 1 , w n c 2 , I R I S _ G A I N = g ,
IRIS_OFFSET=o, MS= ms1, ms2, MS_M= ms3, ms4 and
IRIS= s1, s2, s3, s4, s5, the adjustment values fulfill the con-
ditions below, they are determined as within specifications.
– 19 –
Pattern box
(color viewer)
x
OK
Copy