Dns Server - D-Link DSL-2790U User Manual

Configuration

DNS Server

Select DNS Server Interface from available WAN interfaces OR enter static
DNS server IP addresses for the system. In ATM mode, if only a single PVC
with IPoA or static IPoE protocol is configured, Static DNS server IP addresses
must be entered.
DNS Server Interfaces can have multiple WAN interfaces served as system dns
servers but only one will be used according to the priority with the first being the
higest and the last one the lowest priority if the WAN interface is connected.
Priority order can be changed by removing all and adding them back in again.
Click the Apply / Save button when you are finished.
Dynamic DNS
The Router supports Dynamic DNS (Dynamic Domain Name Service). The
Dynamic DNS service allows a dynamic public IP address to be associated with
a static host name in any of the many domains, allowing access to a specified
host from various locations on the Internet. This is enabled to allow remote
access to a host by clicking a hyperlinked URL in the form
hostname.dyndns.org, Many ISPs assign public IP addresses using DHCP, this
can make it difficult to locate a specific host on the LAN using standard DNS. If