Eth Interface - D-Link DSL-2790U User Manual

Configuration
The ATM PVC Configuration window allows you to set up ATM PVC
configuration. Enter Virtual Path Identifier,and Virtual Channel Identifier. The
VPI and VCI values should be provided by your ISP. This window also allows
you to select DSL Link Type, PPPoA、IpoA and EoA (EoA is for PPPoE, IPoE,
and Bridge)
Use the drop-down menu to select the desired Encapsulation Mode..
Click the Apply / Save button to Save.
To access the ETH WAN Interface Configuration window, click the ETH Interface button in the Layer2 Interface directory.