Usage Of Usb Interface; Driver Automatic Installation - D-Link DSL-2790U User Manual

Appendix C – Technical Specification
The Combo DSL Gateway is a device with both Ethernet Interface and USB Interface, which is independent, you may use either of them to connect to the
different computers, in this way the two computers can connect to the network at one time. The Gateway can be seen as a simple two-port HUB. So, do not
connect both the Ethernet Interface and USB Interface to a same computer.
When using USB Interface, you must install the drivers. After installation, a virtual network card, "USB Remote NDIS Network Device", will be added
into the computer. It has all the functions of a real network card, and it makes installation more easily.
NOTES:
The following shows the steps for Windows®2000, the installation, configuration and uninstallation of Windows®98 or Windows®XP are similar to
this.

Driver Automatic Installation

There are two files in the DRIVER-CD.
1. Run "setup.exe" in DRIVER-CD and click "Next" button.

Usage of USB Interface