Other Main Functions; Setting The Clock; Detaching The Control Panel; Cd Changer Operations - JVC KS-FX12 Service Manual

KS-F150
KS-FX12

OTHER MAIN FUNCTIONS

Setting the clock

2,3 1,4 2,3
1
Press and hold the button for more than 2
seconds.
"CLOCK H" or "CLOCK M" appears on the display.
2
1.
Set the hour.
1. Select "CLOCK H" if not shown on the
display.
2.
2. Adjust the hour.
3
1.
Set the minute.
1. Select "CLOCK M".
2.
2. Adjust the minute.
4
Start the clock.
To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation: During tape operation:
Frequency Clock
Play mode

CD CHANGER OPERATIONS

We recommend that you use one of the CH-X series with your unit.
If you have another CD automatic changer, consult your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-
U15K) for connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your CD changer.
• If no discs are in the magazine of the CD changer or the discs are inserted upside
down, "NO CD" or "NO DISC" will appear on the display. If this happens, remove the
magazine and set the discs correctly.
• If "RESET 1 - RESET 8" appears on the display, something is wrong with the connection
between this unit and the CD changer. If this happens, check the connection, connect
the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.

Playing CDs

¢
4
1
Select the CD automatic changer.
CD- CH
Playback starts from the first track of the first disc.
All tracks of all discs are played back.
Disc number
Track number
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
1-6
4
During CD changer operation:
Elapsed Disc
Clock
playing time
number
Clock
1
Number buttons
\
Elapsed playing time
(The clock time is shown if you have
pressed DISP to see the clock time.
See page 13.)

Detaching the control panel

You can detach the control panel when leaving the car.
When detaching or attaching the control panel, be careful not to damage the connectors on
the back of the control panel and on the panel holder.
How to detach the control
panel
Before detaching the control panel, be sure
to turn off the power.
1
Unlock the control panel.
2
Lift and pull the control panel
out of the unit.
3
Put the detached control
panel into the provided case.
13 14
To fast forward or reverse the track
To go to the next track or the previous track
To go to a particular disc directly
7 8
Press the number button corresponding to the disc number to start its
playback.
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
Ex. When disc number 3 is selected
15 16
How to attach the control
panel
1
Insert the left side of the
control panel into the groove
on the panel holder.
2
Press the right side of the
control panel to fix it to the
panel holder.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Connectors
¢, while playing a CD, to fast forward the track.
Press and hold
Press and hold 4
, while playing a CD, to reverse the track.
¢ briefly, while playing a CD, to go ahead to the beginning
Press
of the next track. Each time you press the button consecutively, the
beginning of the next tracks is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning
of the current track. Each time you press the button consecutively, the
beginning of the previous tracks is located and played back.
9 10 11 12
Disc number
Track number