Table of Contents
Advertisement
Commands
SHOW
Usage:
SHOW <option>
The SHOW command displays the settings of the user-configurable options within dBUG. When
no option is provided, SHOW displays all options and values.
Examples:
To display all options and settings, the command is:
show
To display the current baud rate of the board, the command is:
show
baud
Here is an example of the output from a show command:
dBUG> show
base: 16
baud: 19200
server: 192.0.0.1
client: 192.0.0.2
gateway: 0.0.0.0
netmask: 255.255.255.0
filename: test.srec
filetype: S-Record
mac: 00:CF:52:49:C3:01
3-32
PRELIMINARY—SUBJECT TO CHANGE WITHOUT NOTICE
Show Configurations
MPC564EVB User's Manual
Advertisement
Table of Contents
