Stainless Steel Surfaces; Pan Supports, Control Knobs - Miele CS 1013-1 Operating And Installation Instructions

Cleaning and care

Stainless steel surfaces

Clean stainless steel surfaces with a
solution of warm water and a little
washing-up liquid applied with a soft
sponge. In the case of stubborn
dried-on soiling, soak first.
Finally, dry with a soft cloth.
If necessary a cleaning agent for
ceramic and stainless steel surfaces
can be used (see "Optional
accessories"). Apply with even
pressure following the direction of the
"grain".
Do not use stainless steel cleaning
agents on printed surfaces. This
would rub off the print. These areas
should be only cleaned with a
solution of warm water and a little
washing-up liquid applied with a soft
sponge.
A conditioning agent for stainless steel
can be used after cleaning to help keep
your appliance looking good (see
"Optional accessories").
Apply sparingly with a soft cloth
following the instructions on the
packaging.
20

Pan supports, control knobs

Remove the pan supports. Clean the
pan supports and the control knobs
with a solution of warm water and a little
washing-up liquid applied with a soft
sponge. Stubborn soiling should be
soaked first.
After cleaning dry all surfaces with a
clean cloth.
Do not clean the pan supports in a
dishwasher.