2.4 megapixel dome camera with 3.6mm fixed iris lens & 60' ir leds (2 pages)
Summary of Contents for Vitek VTD-A4F/IWM
Page 1
Alpha Mega Series Indoor Dome Cameras • 1000 TV Lines of Resolution (1.39 MegaPixel) • 1/2.9” Sony® CMOS Sensor • Highly Advanced EN773E Digital Signal Processor • 3.6mm Fixed & 2.8-12mm Varifocal Lens Options • Available with 35 IR LEDs (120’ Range) •...
boX ConTenTs BOX CONTENTS 1) Alpha Mega Dome Camera BOX CONTENTS 2) Mounting Accessories 1) Dome Camera 3) Secondary Video Output Cable 1) Dome Camera 4) This instruction Manual & Mounting Template 2) Mounting Accessories 2) Mounting Accessories 3) This instruction Manual & Mounting Template 3) This instruction Manual &...
MoDels VTD-A4F/IWM Alpha Mega Series 1000 TVL (1.39MP) Indoor Fixed 3.6mm Dome - Ivory VTD-A4F/IBM Alpha Mega Series 1000 TVL (1.39MP) Indoor Fixed 3.6mm Dome - Black VTD-A2812/IWM Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal Dome - Ivory VTD-A2812/IBM Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal...
It is of utmost importance that the proper Voltage and Amperage is used when applying power to your VITEK Alpha Series Dome Camera. They can be pow- ered by either 12V DC or 24V AC (except for the model VTD-A4F/IM - 12V DC only).
osD operaTion Settings can be made using the Joystick located on the rear of the camera. Please press joystick down The Main Menu is displayed on monitor. joystick yellow Push the joystick up or down to highlight the function you wish to change.
Page 11
osD operaTion joystick joystick pressing joystick joystick MAIN MENU black...
Page 12
osD operaTion When the Main Menu screen is displayed move highlighted area to EXPOSURE using the up/down of the joystick and then press down on the joystick to enter EXPOSURE Mode. Highlight section to change by using joystick Up/Down. After section is highlighted us joystick Left/Right to adjust settings.
Page 13
osD operaTion When in the MAIN MENU highlight WHITE BAL by using the joystick up/down. Select mode by moving joystick left or right. This mode is for use in Halogen or extremely bright white light. Joystick left to decrease, joystick right to increase. Joystick left to decrease, joystick right to increase.
Page 14
osD operaTion Adjust from 0~10 by using joystick left or right. Used to inverse the picture. corners Adjust from 0~20 by using joystick left or right. OFF, LOW, MIDDLE, HIGH, ACE performs an image enhancement process to enhance the image by changing the brightness value.
Page 15
osD operaTion Adjust from 0~20 by using joystick left or right. Adjust from 0~20 with 0 being the left most area. Adjust from 0~20 with 0 being the top area. Adjust from 0~20 with 0 being the smallest area. Adjust from 0~20 with 0 being the smallest area. This function extends the gain range of the screen that is useful if the camera takes a simultaneous picture of both indoor and outdoor.
Page 16
osD operaTion DAY or NIGHT is determined by the built-in light photo sensor. Camera with IR LED must be set to EXTERN Used when DAY or NIGHT is determined by light level through the lens and DAY from/to NIGHT is switched automatically by the scene brightness.
Page 17
osD operaTion DNR is a technique of removing image noise from a video signal by applying a digital comb lter. It makes images clearer and reduces video le size. This Product has a feature that allows you to observe movement in 3 di erent areas on the screen and the word MOTION will appear on screen when motion is detected.
Page 18
osD operaTion SENSITIVITY: Adjust from 0~20 by using joystick left or right. OBJ. KEEP LV: Adjust from 0~60 by using joystick left or right. MOTION EST: Adjust from 0~20 by using joystick left or right. WINDOW TONE: Adjust from 0~6 by using joystick left or right. WINDOW ZONE: Adjust from 0~4 by using joystick left or right.
Page 19
osD operaTion SHAKE SCALE: Adjust from 0~20 by using joystick left or right. BRIGHT SCL: Adjust from 0~20 by using joystick left or right. black...
osD operaTion SERIAL: N/A PEDESTAL: Adjust from 0~20 by using joystick left or right. After entering FOCUS ADJ a box with 3 di erent boxes within will appear on screen. Each box is to aid in focusing of di erent scene contrasts, LEFT box for low contrast MIDDLE box for medium contrast and RIGHT box for high contrast.
speCifiCaTions VTD-AF4/IM Image Device 1/2.9” Sony® CMOS Resolution 1000 TV Lines Min. Illumination 0.1 Lux (B/W) / 1.0 Lux (Color) Effective Pixels 1305 x 1049 (1.39 MegaPixel) S/N Ratio More Than 52dB (AGC Off) Smart Motion Zoom 3D DNR Defog Standard Lens 3.6mm Fixed Lens Power Source...
Page 23
speCifiCaTions VTD-A2812/IM Image Device 1/2.9" Sony® CMOS Resolution 1000 TV Lines Min. Illumination 0.1 Lux (B/W) / 1.0 Lux (Color) Effective Pixels 1305 x 1049 (1.39 MegaPixel) S/N Ratio More Than 52dB (AGC Off) Smart Motion Zoom 3D DNR Defog Standard Lens Varifocal 2.8-12mm IR Corrected Power Source...
Page 28
VITEK LIMITED PRODUCT WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.