Rear Panel - Samsung MX-HS6000 User Manual

Rear Panel

MX-HS6000
1
2
3
4
MX-HS7000
1
2
3
4
Cooling fan
• The fan operates while the unit is powered on.
If you set the unit to the minimum volume, the
1
fan won't operate.
Secure a minimum 10 cm of clear space from
all sides of the fan when installing the product.
AUX IN 2 Terminals
1.
Use an Audio Cable (not supplied) to connect
AUX IN 2 on the product to Audio Out on the
external analog output device.
• Be sure to match connector colors.
2
• If the external analog output device has only
one Audio Out jack, connect either left or right
terminal.
• Press the TUNER/AUX button to select the AUX 2.
• If no button actions for more than 8 hours in AUX
mode, the power will automatically turn off.
FM Antenna Terminals
1.
Connect the FM antenna (supplied) to the FM
Antenna jack.
2.
Slowly move the antenna wire until you find a
location where reception is good, then fasten
3
it to a wall or other rigid surface.
3.
If reception is poor, you may need to install
an outdoor antenna. To do so, connect an
outdoor FM antenna to FM antenna jack on
the rear of the system using a 75Ω coaxial
cable (not supplied).
02680B-MX-HS6000-XY-ENG-20140227.indd 7
LED Terminals for Speaker Beat Waving.
4
ONLY FOR SERVICE
5
• This jack is just for testing, please don't use it.
POWER
6
• Insert only provided power cable.
2.1 CH Speaker Terminals (MX-HS6000)
2.2 CH Speaker Terminals (MX-HS7000)
1.
To achieve the correct sound quality, when
you connect the speakers, match the color
of the speaker plugs to the color of the
7
speaker jacks. See below.
• LEFT channel (marked
• RIGHT channel (marked
• Don't force the Purple SUBWOOFER
connector into the White or Red speaker jack.
7
English
7
6
5
7
6
5
).
).
2014/4/25 8:36:32