Receiving Faxes : Case - Panasonic KX-NS1000 User Manual

4-4
By UM service group (Trunk / port service)
Setting the incoming call service of a service group to fax service and then assigning
the service group to a port allows faxes to be received at that port.
1. Incoming FAX call
1 Set the UM Service group number for each incoming call destination.
DDI/DID example
Setup -> PBX Configuration -> 10.3 DDI/DID Table
UM service Group No.
- Set the UM service Group number for each DDI/DID.

Receiving Faxes : Case 1 (1)

UM Port
2. The call is directed to
the FAX service by
UM service group.
Built-in UM
FAX Service
3. The FAX message is stored.
Destination (for each time mode)
- Set the destination to the floating extension number of
UM (e.g. 500).
* If "None" is set, the value of Port Assignment
works.
(UM Configuration -> 3.2 Port Assignment.)
Mailbox 101
Mailbox 103