Receiving Faxes : Case - Panasonic KX-NS1000 User Manual

4-5
Caller ID / PIN Call Routing
2 Add the Caller ID / PIN call routing table (2/2)
* "FAX Option" setting for the Mailbox should be enabled through COS programming.
Set the incoming call destination (DDI/DID, DIL destination, etc.) to the
3
floating extension number of UM (e.g. 500).
* "Incoming Call Service Parameters" may be set to "Custom Service" , etc..

Receiving Faxes : Case 2 (2)

1. Specifies a Caller ID number (or
range of numbers using the wild
card, " * ")
2. Select "Fax Service" .
3. Specify a Mailbox number in which
fax messages are stored. *
For each time mode