Marcelling - Jacobsen 67971 – LF 3400, Kubota V1505-E3B, 5 Gang, 2WD Safety & Operation Manual

Jacobsen lightweight fairway mower with rops

Hide thumbs Also See for 67971 – LF 3400, Kubota V1505-E3B, 5 Gang, 2WD:

Table of Contents

Available languages

5.3

MARCELLING _____________________________________________________________

NOTE: Arrow indicates direction of travel.

Probable Cause

Mowing (ground) speed is too fast.

HOC (height-of-cut) setting is too low for turf

conditions.

Cutting reel diameter is worn.

Marcelling, like washboarding, is a cyclical pattern of

varying cutting heights, resulting in a wave-like cut

appearance. In most cases, the wave tip-to-tip distance is

2 in. (5 cm) or less.

TN0220

Reduce mowing (ground) speed.

Check/adjust HOC to turf conditions.

Check cutting reel diameter and replace if worn.

QUALITY OF CUT

Remedy

Table of Contents

Table of Contents