Product Features; Code Approval - Monessen Hearth ILDV20NV Installation And Operating Instructions Manual

Ildv series direct vent gas fireplace insert
Hide thumbs Also See for ILDV20NV:
Table of Contents

Advertisement

PRODUCT FEATURES

PRODUCT SPECIFICATIONS
This appliance has been certified
for use with either natural or pro-
pane gas. Refer to the appropriate
data plates.
This appliance is not for use with
solid fuels.
The appliance is approved for
bedroom or bedsitting room instal-
lations.
The appliance must be installed in
accordance with local codes if any.
If none exist use the current instal-
lation code. ANSI Z223.1/NFPA 54
in the USA, CSA B149 in Canada.
This appliance is mobile home appr-
oved.
The appliance must be properly connected to a
venting system.
The appliance is not approved for closet or recessed
installations.

CODE APPROVAL

Direct Vent type appliances draw all combustion air from outside of the dwelling through the vent pipe.
These appliances have been tested by CSA and found to comply with the established standards for DIRECT
VENT GAS FIREPLACE HEATERS in the USA and Canada as follows:
A manufactured home (USA only) or mobile home OEM installation must conform with the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280, or when such a standard is not applicable, the
Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1, or Standard for Gas Equipped
Recreational Vehicles and Mobile Housing, CSA Z240.4.
83D0511
CODE APPROVAL
AND
LISTED VENTED GAS FIREPLACE HEATER
TESTED TO: ANSI Z21.88b-2008/CSA 2.33b-2008 STANDARDS
ILDV30/ILDV20 Fireplace Insert
Figure 1 - ILDV Series Fireplace Insert
Blower
Gas Shut-
Off Valve
Blower Knob
ON/OFF
Switch
OFF/Pilot/
ON Knob
HI/LO Knob
Piezo
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ildv20pvIldv30nvIldv30pv

Table of Contents