Yamaha HTR-5540 Owner's Manual page 36

n
For movie programs: No. 7 to 9
This unit autolnatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.
Table of Program Names for Each Input Format
2
channel 5.1 channel 6.1
channel *
Stereo DOLBY DIGITAL DTS DOLBY DIGITAL DTS
Matrix 6.1 Matrix 6.1
7 MOVIE 70 mm Spectacle DGTL Spectacle DTS Spectacle
Spectacle 6. I Spectacle 6. I
THEATER 1
70
mm
Sci-Fi DGTL Sci-Fi DTS Sci-Fi
Sci-Fi 6. I Sci-Fi 6.1
8 MOVIE 70 mm Adventure DGTL Adventure DTS Adventure Adventure (I I
Adventure 6.1
* means the Matrix 6.1 decoder is ON.
:'&
l
If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP orogram will automaticallv switch to
the Dolby Digital playback sound field or DTS playback sound field.
l
If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the MATRIX 6. I button
on the remote control, the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder usually turns on and the corresponding DSP
program is selected.
l
MATRIX 6. I on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the virtual rear center
speaker. In this case the program name changes to the corresponding name for 6.1 channel.
l
When playing a 6.1 channel source with MATRIX 6. I on the remote control turned off, the program name changes to the
nding name for 5. I channel.
l
The " (Dspl " indicator does not light up when selecting program No. 9 except in Enhanced mode.
l
When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel. main and rear
speakers output effect sounds.
32
CINEMA·DSP
• For movie programs: No.7 to 9
This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.
Table of Program Names for Each Input Format
~
2 channel 5.1 channel 6.1 channel *
Stereo DOLBY DIGITAL DTS DOLBY DIGITAL
DTS
No. Program
Matrix 6.1 Matrix 6.1
7 MOVIE
70 mm Spectacle
DGTL Spectacle DTS Spectacle
Spectacle 6.1
Spectacle n.1
THEATER 1
70 mm Sci-Fi DGTL Sci-Fi DTS Sci-Fi Sci-Fi 6.J Sci-Fi 6.1
8 MOVIE
70 mm Adventure DGTL Adventure DTS Adventure Adventure 6.1 Adventure 6.1
THEATER 2
70 mm General
DGTL General
DTS General General 6.1
General 6.1
9 DOLBY -
Normal
-
Matrix 6.1
-
DIGITAL
-
Enhanced
-
Enhanced 6.1
-
DTS DIGITAL - -
Normal
-
Matrix 6.1
SUR
-
- Enhanced
-
Enhanced 6.1
PRO LOGIC
Normal
- -
-
-
Enhanced
-
-
-
-
PRO LOGIC
Movie -
-
- -
n
Music
-
- -
-
*
means the Matrix 6.1 decoder is ON.
\ I,
'::lil~
• If a Dolby Digital signal ()r DTS signal is input when the input mode is set to AUTO, the DSP program will automatically switch to
the Dolby Digital playback sound field or DTS playback sound field.
• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the MATRIX 6.1 button
on the remote control, the Dolby Digital
+
Matrix 6.J or DTS
+
Matrix 6.\ decoder usually turns on and the corresponding DSP
program is selected.
• MATRIX 6.1 on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the virtual rear center
speaker. In this case the program name changes to the corresponding name for 6.1 channel.
• When playing a 6.1 channel source with MATRIX 6.1 on the remote control turned off, the program name changes to the
corresponding name for 5.1 channel.
• The"
I
DSP )
"indicator does not light up when selecting program No.9 except in Enhanced mode.
• When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, main and rear
speakers output effect sounds.
32
CINEMA·DSP
• For movie programs: No.7 to 9
This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.
Table of Program Names for Each Input Format
~
2 channel 5.1 channel 6.1 channel *
Stereo DOLBY DIGITAL DTS DOLBY DIGITAL
DTS
No. Program
Matrix 6.1 Matrix 6.1
7 MOVIE
70 mm Spectacle
DGTL Spectacle DTS Spectacle
Spectacle 6.1
Spectacle n.1
THEATER 1
70 mm Sci-Fi DGTL Sci-Fi DTS Sci-Fi Sci-Fi 6.J Sci-Fi 6.1
8 MOVIE
70 mm Adventure DGTL Adventure DTS Adventure Adventure 6.1 Adventure 6.1
THEATER 2
70 mm General
DGTL General
DTS General General 6.1
General 6.1
9 DOLBY -
Normal
-
Matrix 6.1
-
DIGITAL
-
Enhanced
-
Enhanced 6.1
-
DTS DIGITAL - -
Normal
-
Matrix 6.1
SUR
-
- Enhanced
-
Enhanced 6.1
PRO LOGIC
Normal
- -
-
-
Enhanced
-
-
-
-
PRO LOGIC
Movie -
-
- -
n
Music
-
- -
-
*
means the Matrix 6.1 decoder is ON.
\ I,
'::lil~
• If a Dolby Digital signal ()r DTS signal is input when the input mode is set to AUTO, the DSP program will automatically switch to
the Dolby Digital playback sound field or DTS playback sound field.
• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the MATRIX 6.1 button
on the remote control, the Dolby Digital
+
Matrix 6.J or DTS
+
Matrix 6.\ decoder usually turns on and the corresponding DSP
program is selected.
• MATRIX 6.1 on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the virtual rear center
speaker. In this case the program name changes to the corresponding name for 6.1 channel.
• When playing a 6.1 channel source with MATRIX 6.1 on the remote control turned off, the program name changes to the
corresponding name for 5.1 channel.
• The"
I
DSP )
"indicator does not light up when selecting program No.9 except in Enhanced mode.
• When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, main and rear
speakers output effect sounds.
32