Mounting Using Anchor Screws - SonicWALL SonicPoint-Ne Getting Started Manual

Mounting Using Anchor Screws

To mount the SonicPoint using included anchor screws:
1. On the mounting surface, mark the location to make two
screw holes. The marks should be horizontally parallel to
each other.
2. Drill the holes to accommodate the metal anchor screws.
3. Screw the anchor screws into the holes to their full depth.
4. Insert the 5/8" screws into the anchors, and screw them in
deep enough to leave minimal space between the screw
heads and the wall surface.
5. (Optional) Attach the front LED/logo cover plate to the top
of the SonicPoint and if necessary, rotate it to the desired
position.
6. Supporting the SonicPoint in your hands, securely fit the
underside slots of the SonicPoint onto the screw heads.
See also, Product Safety and Regulatory Information - page 37
SonicWALL SonicPoint Getting Started Guide Page 27