Shutdown - Toyotomi EPH-121 Instruction Manual

ON TIMER
You can set the ON timer to turn on automatically at the set time by
pressing the ON timer switch during operation and shutdown.
During operation
1 Press the ON timer switch during operation.
Your heater will stop the heating operation and will be standby
condition for ON timer function.
ON timer lamp will be blinking for a few seconds.
2 Press the ON timer switch to select the time when ON timer lamp
is blinking.
Timer lamp will be lit
repeatedly.
ON timer lamp will be lit after blinking for a few seconds and the
ON timer function is set completely.
The ON timer can be changed by pressing ON timer
switch even if it is set completely.
If you wish to cancel the ON timer, press the ON timer
NOTE
switch until ON timer lamp goes off.
Your heater can be operated with Panel select switch and
Temperature select switch when ON timer lamp is blinking.
3 Power lamp, ON timer lamp and Timer lamp will be lit and the
heater will turn on at the set time.
During operation
1 Press the ON timer switch during shutdown.
ON timer lamp will be blinking for a few seconds.
2 Press the ON timer switch to select the time when ON timer lamp
is blinking.
Timer lamp will be lit
repeatedly.
ON timer lamp will be lit after blinking for a few seconds and the
ON timer function is set completely.
The ON timer can be changed by pressing ON timer
switch even if it is set completely.
If you wish to cancel the ON timer, press the ON timer
NOTE
switch until ON timer lamp goes off.
Your heater can be operated with Panel select switch and
Temperature select switch when ON timer lamp is blinking.
3 Power lamp, ON timer lamp and Timer lamp will be lit and the
heater will turn on at the set time.

SHUTDOWN

1 Press the Operation switch to turn the unit off.
Operation lamp, Panel operation lamp and Temperature lamp will go off.
2 Be sure that the Power lamp goes off before unplugging after using the heater.
3 Pull out the Power plug from the electrical outlet.
[1(h)] ⇒ [2(h)] ⇒ [4(h)] ⇒ [8(h)]
[cancel]
[1(h)] ⇒ [2(h)] ⇒ [4(h)] ⇒ [8(h)]
[cancel]
Power lamp
Operation
(ON/OFF)
switch
Panel operation
lamp
Panel select
switch
Temperature
amp
Temperature
select switch
Timer
lamp
OFF timer switch
ON timer switch
12
10