Connecting To A Monitor With A 3G-Sdi In Terminal; Connecting To An External Device With An Rs-232C - Hitachi VZ-HD4000A User Manual

 Connecting to a
Monitor with a 3G-SDI
IN Terminal
VZ-HD4900A
To VIDEO OUT
(3G-SDI) terminal
3G-SDI cable
To 3G-SDI IN
terminal
HD video monitor, etc.
Set the video output format (P. 14)
according to the specifications of
the connected monitor or external
device.
* Regardless of the output format
(P.46) setting, the 3G-SDI output
will be YPbPr.
 Connecting to an
External Device with
an RS-232C
l Use an RS-232C to connect
the camera for control via an
external device.
1
Connect as follows with an
RS-232C cable.
RS-232C IN terminal
RS-232C cable*
To external device
* See P. 63 for terminal specifications.
2
Select SYSTEM SELECT
SWITCH 1 (serial
communication baud rate) for
the connected external device
and set SYSTEM SELECT
SWTICH 3 (RS-232C/RS-422)
to RS-232C.
See P. 15 for how to make
settings.
25