Ceiling Installation - Hitachi VZ-HD4000A User Manual

 Ceiling Installation
Use the included ceiling mount
fixtures (camera side and ceiling
side), along with the safety wire and
screws when mounting the camera
on the ceiling.
Warning
Ÿ To mount the camera in a high
place, such as on the ceiling,
have an installer specialized in
such construction do the work.
Ÿ When mounting the camera
in a high place, make sure the
location it will be mounted and
the materials used for mounting
it (other than the included
fixture, etc.) are strong enough
to support a weight of at least
20kg and then mount the
camera securely. If materials
are not strong enough, it may
fall and cause an injury.
Ÿ To prevent it from falling, be
sure to attach the safety wire.
Ÿ Take all due care to prevent
the camera from falling during
installation.
Ÿ If installed in a high place,
inspect once a year to make
sure the mount has not become
loose. Make more frequent
inspections if the conditions of
use call for it.
20
1
Mount the camera to the ceiling
mount fixture (camera side) with
the included screws (M3 × 8).
Four screws included
(M3 × 8)
Ceilluig mount fixture
(Camera side)
2 Be sure to attach the safety wire
of the camera with the included
screw (M5 × 12).
Install the mounting hardware as
indicated by the mark.
Included screw (M5 ×12)
Safety wire
Mark