Epson TM-C3500 Series Technical Reference Manual page 39

Media type
Media source
Backing paper width
Label width
Label length
Gap between labels
Left and right outer edges
Label edge R
Width of a black mark
Length of a black mark
Center of a black mark
Gaps between black marks
Paper thickness
Perforated line pitch
Form of perforated line
Number of folds
 Do not use the paper with a hole or cutout.
 Autocutting on the perforated lines may generate minute paper dust, causing machine
problems. Also, autocutting ahead of the perforated line may cause problems when
feeding paper. Therefore, autocutting must be performed 0.5 mm to 1 mm {0.02 to
0.039"} behind the perforated line.
 When using fanfold paper, the black marks must be at least 2 mm {0.079"} from the per-
forated lines.
 As for the black mark position on the die-cut label paper, match the label edge and the
black mark edge.
 The perforated lines on both sides of the paper edge must be left uncut.
Plain label / Matte label
Fanfold paper
50 to 112 mm {1.97 to 4.41"}
46 to 108 mm {1.81 to 4.25"}
15 to 301.8 mm {0.59 to 11.88"}
3 to 6 mm {0.12 to 0.24"}
2 mm  0.5 mm {0.079  0.02"}
1.5 mm {0.059"} or less
13 mm {0.51"} or more
5 mm {0.19"} or more
8.5 mm  1 mm {0.33  0.039"}
18 to 304.8 mm {0.71 to 12.0"}
0.161 to 0.164 mm {0.0063 to 0.0065"}
203.2 to 304.8 mm {8 to 12"}
Plain media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut
Fine media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut
PET film : 0.6 mm uncut, 8.4 mm cut
500 or less
Chapter 1 Product Overview
39
1