Optional Accessories - Simrad AP14 Manual

In the event of the AP14H failing, the LED located under the terminal bay cover of the SCP12 Course
Computer can be used to identify the potential source of the problem -
Flashes Diagnosis
2 Invalid rudder feedback reading from SLF12
Current limit exceeded
4
Control unit not connected
5
6 No compass data received
7 No compass/controls detected
Rudder limits not set / calibration failed
8
In the event of the AP14R failing, the LED located on the circuit board under the black cover of the
SRD12 Drive Unit can be used to identify the potential source of the problem -
Flashes Diagnosis
Control unit not connected
5
No compass data received
6
7 No compass/controls detected
8 Compass calibration failed
Page 38

7.5 Optional Accessories

The following optional accessories for the
AP14H and AP14R are available from your
Simrad dealer. Please quote the correct part
Fault Location
number when ordering.
SLF12
SRP12, SCP12
SHC14
SHS12
SHC14, SHS12, SCP12
SLF12, SCP12
Fault Location
SHC14
SHS12
SHC14, SHS12, SRD12
SRD12
SCJ12
Additional Control
Unit +
Junction Box
LFK500
SLF12 Feedback Mounting Accessory Kit -
balljoint & universal joint mounting foot.
(for AP14H hydraulic drive option only)
SCJ14
Hand Controller +
Junction Box
LFKSeastar
Kit for mounting SLF12 (AP14H only) to
Teleflex HC5345 cylinders
Page 39