10
4.4
MEDIA
A.
Place lava or ember rock around the base of the appli-
ance, making sure not to block any burner ports or valve
access. Retain a small amount of lava rock for step 3 and
if applicable step 4.
B.
Place formed charcoal lumps around the front and sides
of the appliance.
C.
Use remaining lava or ember rock to blend with the char-
coal lumps.
D.
GL30 ONLY: Sprinkle remaining lava rock onto the outer
fi bre ember beds to hide the seam.
4.5
LOGO PLACEMENT
Remove the backing of the logo supplied. Centre the logo
on the front of the appliance, ½" in from the left side, as
shown.
W415-0472 / D / 11.24.10
GL 18
GL 24
GL 30
½"
½"