Maintenance
2.3.2
Replacing the 12" rear wheel
When replacing a rear wheel, the wheel may not be braked.
Replace the rear wheel as follows:
Support the wheelchair in such a way that the wheel is
•
elevated.
Remove locking nut (A) with a 12 mm box spanner.
•
Pull wheel (B) off the axle (C).
•
Remove the tyres; see 'Repairing the tyre of the drive
•
wheel' or 'Replacing the tyre of the drive wheel'.
Fit the new wheel in the reverse order.
2.3.3
Replacing the 16" rear wheel (option)
When replacing a rear wheel, the wheel may not be braked.
Replace the rear wheel as follows:
Support the wheelchair in such a way that the wheel is
•
elevated.
Remove locking nut (A) with a 17 mm box spanner.
•
Pull wheel (B) off the axle (C).
•
Remove the tyres; see 'Repairing the tyre of the drive
•
wheel' or 'Replacing the tyre of the drive wheel'.
Fit the new wheel in the reverse order.
2.3.4
Replacing the rear wheel of Ibis with
PowerSupport (option)
When replacing a rear wheel, the wheel may not be braked.
Replace the rear wheel as follows:
Support the wheelchair in such a way that the wheel is
•
elevated.
Remove nut (A) with a 19 mm open-ended spanner.
•
Remove wheel (B).
•
Remove the tyres; see 'Repairing the tyre of the drive
•
wheel' or 'Replacing the tyre of the drive wheel'.
Fit the new wheel in the reverse order.
10
C
B
C
B
A
A
A
B
Version 2015v1