Repairing The Tyre Of The Rear Wheel; Replacing The Tyre Of The Rear Wheel - Handicare Ibis Service Manual

Hide thumbs Also See for Ibis:
Table of Contents

Advertisement

2.3.5

Repairing the tyre of the rear wheel

When repairing the inner tube of a rear wheel, the wheel should be braked, so that it does not rotate at the same
time.
Repair a flat tyre as follows:
Support the wheelchair in such a way that the wheel is elevated.
Pull out the valve to completely deflate the tyre.
Using tyre levers pull the front of the tyre across the edge of the rim.
Carefully pull the inner tube across the edge of the rim.
Push the valve from the opening in the rim.
Pull the inner tube from the tyre for repair or replacement.
Repair the inner tube or replace it.
Now, the repaired or new inner tube should be placed as follows:
Put the valve of the inner tube through the opening in the rim.
Press the inner tube into the tyre.
Place the tyre around the rim.
Use tyre levers to place the tyre around the rim: be careful not to damage the inner tube with the tyre levers.
The inner tube must not become jammed between the rim and the tyre.
Pump up the inner tube, see 'technical data'.
Remove the support from under the wheelchair.
The wheelchair is ready for use.
2.3.6

Replacing the tyre of the rear wheel

When replacing a tyre of a rear wheel, the wheel should be braked, so that it does not rotate at the same time.
Replace a tyre as follows:
Support the wheelchair in such a way that the wheel is elevated.
Pull out the valve to completely deflate the tyre.
Using tyre levers pull the front of the tyre across the edge of the rim.
Carefully pull the inner tube across the edge of the rim.
Push the valve from the opening in the rim.
Pull the inner tube from the tyre.
The whole tyre can now be removed.
Now the tyres (with repaired or new inner tube) should be assembled as follows:
Place one side of the tyre around the rim.
Put the valve of the inner tube through the opening in the rim and press the inner tube into the tyre.
Place the tyre around the rim.
Use tyre levers to place the tyre around the rim: be careful not to damage the inner tube with the tyre levers.
The inner tube must not become jammed between the rim and the tyre.
Pump up the inner tube, see 'technical data'.
Remove the support from under the wheelchair.
The wheelchair is ready for use.
Version 2015v1
Maintenance
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents