Vwf18Spa, 24Sp Log Placement - Monessen Hearth VWF18 Installation And Operating Instructions Manual

LOG PLACEMENT
MODELS VWF18SPA AND VWF24SPA (8 LOGS)
#8
Hump Hump
#2
#1A
Optional Accessory
Cover
Figure 24 - VWF18SPA and VWF24SPA
(Split Pine) Log Placement
18
#7 #7
#6 #6
#5
#4
#3
#1B
NOTE: Each log may have an identifying number on
bottom surface.
1. Slide shield plate down back of burner pan. See Figure 24.
2. Place Left Front Log #1A on front left of grate. Place Right Front
Log #1B on front right of the grate. See Figure 24.
3. Place front end of Side Support Log #2 on top left of Log #1. Rest
other end of Log #2 on the rear grate bar. See Figure 24.
4. Fit cutout in the bottom left of Rear Log #3 over the back end of log
#2. Rest right end of Log #3 on rear grate bar. See Figure 24.
5. Rest front end of Right Log #4 (not used in VWF18SP) on right top
of Log #1. The back end of Log #4 should rests next to right hump
of Log #3. See Figure 24.
6. Place front end of Right Middle Log #5 to left of the hump on Log
#1. Rest back end of Log #5 on Log #4. See Figure 24.
7. Rest front end of Left Log #6 on Log #1 next to Log #5. Place back
end of Log #6 on left top of Log #3. See Figure 24.
8. Place Top Center Log #7 on Log #5 with its back end resting on Log
#6. See Figure 1. See Figure 24.
9. Place Top Left Log #8 on Log #7. See Figure 24.
Shield
Plate
Figure 25 - VWF18SPA and VWF24SPA
(Split Pine) Log Placement
27D8520