Table of Contents
Advertisement
MAINTENANCE
Leveling
Legs
Light Replacement
Some floors arc"not level. For proper baking,
Before replacing tile light bulb, diseonneet
the
your range must be level. The leveling legs are
power to the range. Be sure the bulb is cool.
located on each comer of the base of the range.
Do not touch a hot bulb with a damp cloth as the
Level the range by turning the legs.
bulb may break.
To Replace
Panel Light
Grasp the top trim of the backpanel with"your
thumbs under the front edge and pull outward
while lifting to release the trim front tile eatehes
at each end. Remove the bulb and replace it with
an 18 watt fluorescent tube. Snap the top trim
_
hack into place and restore tile power. Reset tile
clock to the current time-of-day.
(.,)
_4
WA/1NING:
To reduce the riskof aeeidentaI
....
tipping of the range, it must be Secured b,
properly installed antittip device. To eh
device iS instaliedpr0_rly,
use :aflashli
look underneath the range to see that c
rear leveling legs is engaged !n the bracket S!ot,
The anti-tip device secures the reag leveling leg
tothe floor, if properly engaged.
:
To Replace
Oven Light
"Ve_yc'are_idly unscrew tile lens cover with a rt_
potholder to prevent possible harm to hands,
then very earefnlly remove the bulb with adD
potholder. Replace with a 40 watt appliance
bulb. Reconnect the power to the range and
reset the clock to the current time-of-day:
PAGE 22
Advertisement
Table of Contents
