TH-103PF10UK/EK
4. Remove the Reinforcement Angle (A).
(Refer to Removal of C1-Board)
5. Remove 6 screws of the flexible cable.
6. Remove the flexible cables from the connectors (CA3,
CA4, CA5, C20, C21, C23).
7. Disconnect the connectors (C22, C24).
8. Remove 6 screws and then remove C2-Board.
7.29. Removal of C3-Board
1. Remove the Eye Bolt.
2. Remove 5 screws and then remove the Rear Cover Angle
(C).
3. Remove 6 screws and then remove the Reinforcement
Angle (C).
4. Remove 6 screws of the flexible cable.
5. Remove the flexible cables from the connectors (CA6,
CA7, CA8, C31, C32).
6. Disconnect the connector (C34).
7. Remove 5 screws and then remove C3-Board.
40