TH-103PF10UK/EK
1. Disconnect the connectors (F1, F8, F9).
2. Remove 5 screws and then remove F-Board.
7.16. Removal of PC-Board
1. Disconnect the connectors (PC201, PC202, PC203,
PC204, PC205).
2. Remove 2 screws and then remove PC-Board.
7.17. Removal of SU-Board
1. Remove the Side Angle (R).
(Refer to Removal of the Side Angle (L), (R) )
2. Remove 6 screws and then remove the Reinforcement
Angle (A).
3. Disconnect the Fan relay connectors.
4. Remove 4 screws and then remove the Fan Block (A),
(B).
5. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU55).
6. Disconnect the connector (SU45).
7. Remove 9 screws.
8. Slide the SU-Board to the upper direction to remove the
SU-Board from the connectors (SU41, SU42).
Take out so as not to damage SU-Board.
32