KTM 400 Owner's Handbook Manual page 18

TOTAL MILEAGE „DST"
after changing battery
16
3. by pushing the right button
you jump to the next figure
TIME „CLK"
1. make sure the time is indicated
and push the button on the
back approx. 5 seconds (time
starts blinking)
4. repeat nos. 2 + 3 until correct time is indicated
1. use the right button to select
the position to be changed
4. repeat nos. 2 + 3 until the previously
noted total mileage is indicated
2. push the left button until the right
figure is showed in the display
5 sec
2. push the left button until the right
figure is showed in the display
5. push the button on the back
with a sharp object approx. 1
second to terminate the set-
ting procedure (the value is
thus stored)
3. by pushing the right button you
jump to the next figure
1 sec
5. push the button on
the back approx. 1
second to terminate
the setting procedure
1 sec