Canon PowerShot SX610 HS User Manual page 107

4
Connect the printer to the network.
● In the printer's Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
5
Choose the printer.
● Press the [ ][ ] buttons to choose the
printer name, and then press the [ ]
button.
6
Choose an image to print.
● Press the [ ][ ] buttons to choose an
image.
● Press the [ ] button, choose [ ], and
press the [ ] button again.
● Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
● For detailed printing instructions, see
"Printing Images" ( = 133).
● To end the connection, press the [ ]
button, press the [ ][ ] buttons on the
confirmation screen to choose [OK], and
then press the [ ] button.
● Connections require that a memory card with saved images be in
the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 27) > [
] tab > [Wi-Fi Settings] > [Target History] > [Off].
● To use another access point, follow steps 3 – 4 in "Using Another
Access Point" ( = 96).
Before Use
Basic Guide
Advanced Guide
][ ] buttons to
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
107