DP-SG7/SG7G
Contents
CONTENTS / CAUTIONS.......................................... 2
ADJUSTMENT ............................................................4
PC BOARD ................................................................ 5
Cautions
Operation to reset
The microcomputer may fall into malfunction (impos-
sibility to operate, erroneous display, etc.) when the
power cord is unplugged while power is ON or due
to an external factor. In this case, execute the follow-
ing procedure to reset the microcomputer and return
it to normal condition.
÷ Please note that resetting the microcomputer clears
the contents stored in it returns it to condition when it
left the factory.
2
CONTENTS / CAUTIONS
SCHEMATIC DIAGRAM ............................................ 7
EXPLODED VIEW ....................................................13
PARTS LIST..............................................................15
DP-SG7
Pull the power plug from the receptacle, and then
plug it in again.