Optional Settings; Changing The Dvd Settings (In The Setup Menu) - FUNAI DV220FX5 Owner's Manual

Changing the DVD Settings (in the setup menu)

In the setup menu, you can customize the various kinds of settings as you prefer.
Refer to the following instructions to navigate through the setup menus.
1
Press Press [SETUP] [SETUP]. .
2 Use [ [ 0 0 0 / / 1 1 ] ] to select a setup item.
Use to select a setup item.
3
Press [ [ L L L ] ] to access the highlighted item.
Press to access the highlighted item.
4 Use [ [ K K K / / L L ] ] to go up or down in the menu list.
Use to go up or down in the menu list.
5
Press [ENTER] Press [ENTER] to access the sub contents. to access the sub contents.
6
Use [ [ K K K / / L L ] ] to select a setting.
Use to select a setting.
7
Press [ENTER] Press [ENTER] to enter. to enter. to enter.
8
Press [SETUP] Press [SETUP] to exit to exit. .
• The following table is the contents which you can set and the default settings. Refer to the table for useful operation.
• Your change to each setting stays activated even when the unit is turned off.
Setup menu (highlight is the default)
TV Aspect
Movie Rating
Password
Default
EN

OPTIONAL SETTINGS

OPTIONAL SETTINGS
Contents
4:3 Pan & Scan Sets the aspect ratio of the playback image to
4:3 Letterbox fit your TV.
16:9 Widescreen See the note on the right.
16:9 Squeeze
1 [ALL] Sets the rating level for the disc playback.
2 [NR] Rating settings allows you to set the rating
3 [G] levels of your DVD.
4 [PG] Playback will stop if the ratings exceed the
5 [PG-13] levels you set.
6 [R]
7 [NC-17]
8 [X-Adult]
Sets the password for "Movie Rating" and
"Default" settings.
– For the first time use.
TV Aspect
Movie Rating
Password
Default
Enter any 4-digit number(except for 4737).
• Press cursor [ K] or [ L] to change the
number, then press cursor [1].
• Press [0] to erase if you input the incorrect
number.
• When 4-digit numbers are entered, press
[ENTER].
– A password has been set already. p
( is displayed.)
TV Aspect
Movie Rating
Password
Default
Enter your 4-digit password.
• Press cursor [ K] or [ L] to change the
number, then press cursor [1].
• Press cursor [0] to erase if you input the
incorrect number.
• When 4-digit numbers are entered, press
[ENTER].
Reset to default setting.
Restore
- - - -
- - - -
LANGUAGE Menu
SYSTEM Menu
TV Aspect
Movie Rating
Password
Default
Menu list
Notes
• Select "4:3 Pan & Scan" for a full height
picture with both sides adjusted.
• Select "4:3 Letterbox", black bars may
appear on the top and bottom of the
TV screen.
• Select "16:9 Widescreen" if a wide-
screen TV is connected to this unit.
• Select "16:9 Squeeze" to display 4:3
aspect ratio in the center of the 16:9
screen when playing back 4:3 images.
• The rating level can be changed when
a password has not been set yet for
the first time use.
• If you have set a password already,
"Movie Rating" cannot be selected.
• If you forget the password, enter
6
"4737" at step , then enter your new
password.
• Playback will stop if the ratings exceed
the levels you set, it will require you to
enter a password before the disc will
play back.
• This function is available only when
is displayed.
• "Default" is not selected if you have set
a password already.
• When you do not wish to initialize,
press [SETUP] to exit the menu at
7
step .
AUDIO Menu
VIDEO Menu
4:3 Pan & Scan
4:3 Letterbox
16:9 Widescreen
16:9 Squeeze
Sub contents
23