Alfa Tct; Selector Lever - Alfa Romeo GIULIETTA Owner's Handbook Manual

ALFA TCT

(for versions/markets, where provided)
IN BRIEF
The car can be equipped with an
electronically managed Alfa TCT
6-speed automatic transmission
where gearshifting takes place
automatically according to the
instantaneous car usage parameters
(car speed, road gradient and
accelerator pedal position).
The new transmission is an absolute
innovation as it matches the
Start&Stop system with the most
recent alternative to traditional
automatic transmissions with built-in
torque converter.
Manual gearshifting can still occur
thanks to the sequential mode
position of the gear lever.

SELECTOR LEVER

The lever fig. 128 (left hand drive
versions) or fig. 129 (right hand drive
versions), can be placed in the following
positions:
❒ P = Park
❒ R = Reverse
128 - Left hand drive versions
129 - Right hand drive versions
❒ N = Neutral
❒ D = Drive, (automatic forward speed)
❒ + = Sequential upshifting
❒ − = Sequential downshifting
If the lever is used in sequential mode,
moving the latter from D to the left,
the positions towards + or – are
unstable.
The lever has a button A, which must
be pressed to move the lever to P or R.
DISPLAY
The display can show the following:
❒ in automatic driving mode, the
gear selected (P, R, N, D). With
lever in position D (Drive), the display
will show D and the gear engaged
(e.g. D3 - see fig. 130).
❒ in sequential driving mode, the
manual engagement of a (higher
A0K0617
or lower) gear, with the relevant
number fig. 131;
A0K0618
130
131
A0K1540
A0K1541
151