Preparation For "Isofix" Child Seat; Installing A Universal Isofix Child Seat - Alfa Romeo GIULIETTA Owner's Handbook Manual

PREPARATION FOR
"ISOFIX" CHILD
SEAT
The car is equipped with ISOFIX
anchorages, a new standard which
makes fitting a child seat quick, simple
and safe.
Isofix systems can be fitted alongside
conventional child seats on different
seats in the same car.
fig. 117 Shows an example of a
Universal Isofix child restraint system for
weight group 1.
81)
The other weight groups are covered
by specific Isofix child seats, which can
be used only if specifically tested for
this car (see list of cars provided with
the child seat).
IMPORTANT The central rear seat is
not approved for any type of Isofix child
seat.
INSTALLING A
UNIVERSAL ISOFIX
CHILD SEAT
Proceed as follows:
❒ attach the child restraint system to
the special lower metal rings B fig.
118, located inside the rear seat
backrest (to access the rings lift
hinge A);
117
118
❒ secure the upper belt (available
together with the child restraint
system) to the special attachments C
fig. 119 located in the rear part of
the backrest.
119
It is possible to have a mixed assembly
of traditional child restraint system
and Universal Isofix ones. Remember
A0K0018
that when using a Universal Isofix child
restraint system, you can only use
type-approved child restraint systems
with the marking ECE R44 (R44/03
or superior) "Universal Isofix".
The Universal Isofix "Duo Plus" child
seat and the special "G 0/1 S" seat are
available from Lineaccessori Alfa
Romeo.
For any further installation/usage
A0K0510
details, refer to the "Instruction Manual"
provided with the child restraint system.
82) 83) 84)
A0K0511
137