Isofix Child Restraint System Setup - Alfa Romeo Giulietta Owner's Handbook Manual

ISOFIX CHILD RESTRAINT
SYSTEM SETUP
The vehicle is equipped with ISOFIX
anchorages, a new standard which makes
fitting a child restraint system quick,
simple and safe.
Traditional child restraint systems can be
fitted alongside Isofix child restraint
systems on different seats in the same
car.
As an example, fig. 52 shows an example
of a Universal Isofix child restraint
system for weight group 1.
52
The other weight groups are covered by
specific Isofix child restraint systems,
which can be used only if specifically
tested for this car (see list of cars
provided with the child restraint system).
72
IMPORTANT The central rear seat is not
approved for any type of Isofix child
restraint system.
INSTALLING A UNIVERSAL ISOFIX
CHILD RESTRAINT SYSTEM
Proceed as follows:
attach the child restraint system to
the special lower metal rings 2 fig. 53,
located inside the rear seat backrest (to
access the rings lift hinge 1);
65)
53
secure the upper belt (available
together with the child restraint system)
A0K0018C
to the special attachments 1
fig. 54 located in the rear part of the
backrest.
54
It is possible to have a mixed assembly of
traditional child restraint systems and
Universal Isofix ones. Remember that
when using a Universal Isofix child
restraint system, you can only use
approved child restraint systems with
the marking ECE R44 (R44/03 or
superior) "Universal Isofix".
The Universal Isofix "Duo Plus" child seat
A0K0510C
and the special "G 0/1 S" seat are
available from Lineaccessori MOPAR
For any further installation/usage details,
refer to the "Instruction Manual"
provided with the child restraint system.
71) 72) 73) 74) 75)
A0K0511C
.
®