SATO MB400i Operator's Manual page 16

Overview
Usage Safety
• Do not place the printer in a hot or cold place
The operation temperature range is -15°C to 50°C (for
wireless LAN: 0 to 50°C) where humidity does not cause
condensation. Do not place the printer in an area with high
humidity or at a temperature outside the specified range.
• Do not drop or apply undue shock to the printer
The printer is generally resistant to vibration possibly
caused during normal transportation. However, do not
apply extreme vibration or shock by dropping the printer.
• Do not disassemble or modify the printer
The printer has high-precision components inside requiring
fine adjustment.
• Connect the correct cables to the input terminals
Cables of the correct specifications are required for
connection to the external equipment through the external
input terminals. Contact your nearest dealer or service
center if necessary.
• Use the recommended accessories
Using optional equipment other than the specified
equipment may cause a malfunction. Always use the
equipment specified in this guide.
• Use the correct media
Use the specified media. Otherwise, faulty printing or
printer damage may occur.
1-4