Table of Contents
Advertisement
BIOS Utility
The BIOS Utility is a hardware configuration program built into your computer's
BIOS (basic input/output system).
Your computer is already properly configured and optimized, and you do not need
to run this utility. However, if you encounter configuration problems, you may
need to run it. Please also refer to Chapter 6, Troubleshooting when a problem
arises.
To activate the BIOS Utility, press F2 during POST.
Information
CPU Type
CPU Speed
HDD Model Name:
HDD Serial Number
ATAPI Model Name:
ATAPI Serial Number
System BIOS Version
VGA BIOS Version
KBC Version
Serial Number
Asset Tag Number
Product Name
Manufacture Name
UUID Number
F1
Help
Select Item
Esc Exit
Select Menu
Note: The screen above is for reference only. Actual values may differ.
Navigating the BIOS Utility
These are the menu options: Information, Main, Advanced, Security, Boot and
Exit.
To enter a menu, highlight the item using the ← → keys.
Within a menu, navigate through the BIOS Utility by following these instructions:
Press the cursor up/down keys ( ↑ ↓) to select item.
•
•
Press the F5/F6 to change the value of a parameter.
•
Press Enter to go to sub-menu.
•
Press Esc while you are in any of the menu options to return to the main menu
PhoenixBIOS Setup Utility
Main
Advanced
Mobile AMD Sempron (tm)Processor 2600+
1.60 Ghz
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXX
UJDA760 DVD/CDRW-(SM)
None
X.XX.XX.XX.XX
XX.XX.XX
XX.XX.XX
XXXXXXXXXXXXXXXXXXXXXX
N/A
XXXXXXXXXX
Wistron
00000000-0000-0000-0000-000000000000
F5/F6 Change Values
Enter Select > Sub-Menu
Security
Boot
F9
Setup Defaults
F10 Save and Exit
65
Exit
Advertisement
Table of Contents
