Bios Utility - AOpen 1847 User Manual

BIOS Utility

The BIOS Utility is a hardware configuration program built into your computer's
BIOS (basic input/output system).
Your computer is already properly configured and optimized, and you do not need
to run this utility. However, if you encounter configuration problems, you may
need to run it. Please also refer to Chapter 6, Troubleshooting when a problem
arises.
To activate the BIOS Utility, press F2 during POST.
Note: The screen above is for reference only. Actual values may differ.
Navigating the BIOS Utility
These are the menu options: Information, Main, Advanced, Security, Boot and
Exit.
To enter a menu, highlight the item using the ← → keys.
Within a menu, navigate through the BIOS Utility by following these instructions:
Press the cursor up/down keys ( ↑ ↓) to select item.
•
• Press the F5/F6 to change the value of a parameter.
• Press Enter to go to sub-menu.
• Press Esc while you are in any of the menu options to return to the main menu
73