LG PW700 Owner's Manual page 8

8
SAFETY INSTRUCTIONS
CAUTION
Contact your seller or our service
y
center once a year to clean the
internal parts of the projector.
- If you do not clean the projector
for a long period of time, dust will
accumulate, which may result in fire
or damage to the projector.
When cleaning plastic parts such
y
as the projector case, unplug the
power first and wipe with a soft cloth.
Do not spray with water or wipe with a
wet cloth. Never use glass cleaner,
automobile or industrial shiner,
abrasives, wax, benzene, or alcohol
as these can damage the projector.
- This can result in fire, electric shock
or cause damage to the product
(deformation and corrosion).
Remove the plug from the outlet
y
before cleaning the product.
- Otherwise, this may result in electric
shock.
Others
WARNING
Some users may experience a
y
seizure or other abnormal symptoms
when they are exposed to a flashing
light or particular patterns from a
video game.
When you go out, place the projector
y
out of reach of animals, and remove
the power plug from the wall outlet.
- Using a damaged power cord may
result in short circuit or fire.
Do not use the projector near high-
y
precision electronic devices or those
that transmit weak radio signal.
- This may affect the operation of the
product, causing an accident.
Only a qualified technician can
y
disassemble or modify the projector.
For diagnosis, adjustment, or repair,
contact your seller or our service
center.
- This may result in fire or electric
shock.
Proper ventilation required, do not
y
block airflow around unit. Doing
so can cause injury and internal
overheating.
To prevent damage to lamp, unit must
y
remain plugged in for approximately
3 minutes after power down to allow
for proper cool down (not applicable
on LED models).
Do not touch the lens; doing so can
y
result in burns or damage to lens.
Lens and unit may be HOT during
and immediately after use. Use
caution when handling unit, allowing
for proper cool down.
Only use a grounded electrical outlet.
y
Do not insert anything into or cover
y
up the exhaust vents.
- This may result in fire or electric
shock.
Follow all maintenance guidelines
y
for optimal use; service only at an
authorized service center.
Lamp contains mercury and as such
y
must be disposed of according to
local, state and federal laws (not
applicable on LED models).