LG PW700 Owner's Manual page 7

Table of Contents

Advertisement

Do not place the projector or its
y
remote control with battery in
an extremely high temperature
environment.
- This may result in fire.
Do not use 3D glasses if you do not
y
watch 3D.
CAUTION
Do not place heavy objects on the
y
projector.
- It may fall down and cause personal
injury.
Be careful not to allow any impact to
y
the lens during transport.
Do not touch the lens of the projector.
y
- The lens may be damaged.
Do not use any sharp tools on the
y
projector such as a knife or hammer,
because this may damage the casing.
In the event that no image appears
y
on the screen or no sound is heard,
stop using the projector. Switch off
the projector, unplug it from the power
outlet and contact our service center.
- This may result in fire or electric
shock.
Do not drop anything onto the
y
projector or allow anything to bang
into the projector.
- This may cause damage to the
projector or personal injury.
It is recommended that you maintain
y
a distance of more than 5 - 7 times
the diagonal length of the screen.
- If you watch the screen at a close
distance for a long time, your eye
sight may become worse.
SAFETY INSTRUCTIONS
Do not block the light beam emitted
y
from the projector using a book or
other object.
- Lengthy exposure to the projector
beam may result in fire. In addition,
the lens may be overheated and
damaged by the reflected heat.
Do not start the projector with the
y
volume turned up high.
- High volume may damage hearing.
Do not use high voltage electrical
y
equipment near the projector, (e.g.
bug zapper). This may result in
product malfunction.
Cleaning
WARNING
Do not spray the projector with water
y
when cleaning. Make sure water does
not flow into the projector.
- This may result in fire or electric
shock.
When there is smoke or a strange
y
smell coming out from the projector or
a foreign object falls into the pro jector,
switch it off and unplug it from the
power outlet and contact our service
center.
- Otherwise, this may result in fire or
electric shock.
Use air spray, a soft cloth or a cotton
y
swab moistened with a lens cleaning
chemical or alcohol to remove dust or
stains on the front projection lens.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents