LG PW700 Owner's Manual page 5

Be careful not to tip the projector over
y
when connecting external devices to
the projector.
- This may cause personal injury or
damage to the projector.
Power
WARNING
The appliance coupler is used as the
y
disconnect device.
- Please make sure the device is
installed near the wall outlet to which
it is connected and that the outlet is
easily accessible.
The grounding wire should be
y
connected.
- Ensure that you connect the
grounding cable to avoid electric
shock.
If it is not possible to ground the unit,
have a qualified electrician install a
separate circuit breaker.
Do not try to ground the projector
by connecting it to telephone wires,
lightning rods or gas pipes.
The power plug should be inserted
y
fully into the power outlet.
- An unstable connection may cause
a fire.
Do not place heavy objects on the
y
power cord.
- This may result in fire or electric
shock.
Never touch the power plug with wet
y
hands.
- This may result in electric shock.
Do not plug too many devices into
y
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
SAFETY INSTRUCTIONS
Prevent dust from collecting on the
y
power plug pins or outlet.
- This may result in fire.
To turn off the main power, remove
y
the power plug, which should be
positioned so it is easy to access for
operation.
CAUTION
Hold the plug firmly when unplugging.
y
- A damaged wire may create a fire
hazard.
Ensure the power cord and plug are
y
not damaged, modified, severely
bent, twisted, pulled, sandwiched
or hot. Do not use the product if the
power outlet is loose.
- This may result in fire or electric shock.
Keep the power cord away from heating
y
devices.
- The wire's sheath may melt, which
may result in fire or electric shock.
Place the projector where people will
y
not trip over or tread on the power
cord to protect the power cord and
plug from any damage.
- This may result in fire or electric shock.
Do not turn the projector on or off
y
by plugging in the power plug or
unplugging it from the power outlet.
(Do not use the power plug as a switch.)
- This may result in electric shock or
damage to the product.
Do not insert a conductor into the other
y
side of the wall outlet while the power
plug is inserted into the wall outlet.
In addition, do not touch the power
plug immediately after it is disconnected
from the wall outlet.
- This may result in electric shock.
5