BACKLIGHT
The SCD-2022R/2042R is designed to deliver a distinctive subject and
at the same time, even when the subject is backlight, by adopting a function of
the proprietary W6 DSP chip.
1.
When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the
Function Setup switch so that the arrow indicates BACKLIGHT .
2.
Select a desired mode using the Function Setup switch depending on the camera
purpose.
UseR blC : Enables a user to directly
select a desired area from a
picture, and to view the area
more clearly.
-
LEVEL : Adjust level of the BLC function.
-
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HlC (High light Compensation) :
This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
-
LEVEL : Adjusts the brightness level of a
monitoring area.
LIMIT :
Enable to change the operating condition.
-
- MASK COLOR :
Off : Not being used
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function
Setup switch so that the arrow indicates 'SSNR3'.
2.
Select a desired mode using the Function Setup
switch.
Off : Deactivates SSNR3. Noise is not reduced.
ON : Activates SSNR3 so that noise is reduced.
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch.
4. Then you can adjust the noise reduction level.
Change the color of the masking area. (Black, Red, Blue, Gray, Magenta)
BLC SETUP
▶ 1.LEVEL
2.TOP
IIIII IIIIIIIIIIIIIIII
3.BOTTOM
IIIIIIIIIIIIIIIIII III
4.LEFT
IIIIII IIIIIIIIIIIIIII
5. RIGHT
IIIIIIIIIIII IIII
IIIII
6. RETURN
HLC SETUP
▶ 1. LEVEL
2. LIMIT
3. MASK COLOR
4. RETURN
SSNR3
IIIIIIII IIIIII
▶ LEVEL
1.
2.
RETURN
background
MIDDLE
9
24
25
84
MIDDLE
NIGHT ONLY
BLACK
IIIIIIIIIII
12
English_21