2
Screw T20 (4x)
3
Wall bracket
4
Bracket adjustment screw T30
Install the Camera in the Housing
1. Loosen the holder screws, then slide and lift the holder, see illustration below.
2. Attach the holder to the camera. Align the pin and camera screw with the pin hole and
screw mount on the camera and tighten the camera screw (torque 1 Nm). Be careful not
to overtighten the screw.
1
Holder
2
Holder screw T20 (2x)
3
Pin
4
Camera screw T20
3. If applicable, connect external/input devices or audio devices to the camera.
4. Attach the holder to the bottom cover. Adjust the position of the holder carefully and
tighten the holder screws (torque 0.5 Nm).
AXIS P1365-E Network Camera
23
1