Enabling/Disabling Dc5V Output; Return To Default Setting; To Reset The Color Adjustments; To Reset All Settings - Eizo RadiForce RX 650 Installation Manual

3-6. Enabling/Disabling DC5V Output

This function allows you to enable/disable the DC5V output. Normally, turn it off during use.
Procedure
1. Touch to turn off the monitor.
2. While holding down the
monitor.
The "Optional Settings" menu appears.
3. Choose "DC5V Output" from "Optional Settings", and choose
4. Select "On" or "Off" with
5. Select "Finish" with
6. Choose
The "Optional Settings" menu is closed.

3-7. Return To Default Setting

There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and All
Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see
●

To reset the color adjustments

This function only resets the color adjustment value for the currently selected mode to the default settings.
Procedure
1. Choose "Color" from the Adjustment menu, and choose
2. Choose "Color Reset" from "Color", and choose
3. Select "Execute" with
4. Choose
The color adjustments revert to the default settings.
●

To reset all settings

This function resets all adjustments to the default settings (except the "Input" and "Optional Settings" menus).
Procedure
1. Choose "Tools" from the Adjustment menu, and choose
2. Choose "All Reset" from "Tools", and choose
3. Select "Execute" with
4. Choose
All settings excluding the "Input" and "Optional Settings" menus are reset to the default settings.
switch at the far left, touch
or
or .
.
"7-6. Main Default Settings" (page
or
.
or
.
for at least two seconds to turn on the
, and choose .
33).
.
.
.
.
.
.
.
Chapter3SettingMonitor
17